.......................................................................................................................................................................................................................................................................

GSP-830 3GHz Spectrum Analyzer

  GSP-830

FEATURES
Frequency Range: 9kHz ~ 3GHz
Low Noise Floor(-117dBm@600MHz, 3k RBW)
640 x 480 high resolution 6.4" TFT COLOR LCD Display
Autoset Function
Sequence Programming Functions
Pass/Fail Test with Limit Line Editing
10 Peak Function
Split Windows Allow Separate Settings
ACPR, OCBW, Channel Power, N-dB and Phase Noise Measurements
AC/DC/Battery Multi-Mode Power Operation
USB/RS-232C/GPIB(Optional) Interface
Direct VGA Output
Optional Tracking Generator
 
SPECIFICATIONS
FREQUENCY
Frequency Range 9kHz - 3GHz
Aging Rate +10ppm, 0-50C, 5ppm/yr
Span Range 2kHz ~ 3GHz in 1-2-5 sequence, full span, zero span.
Phase Noise -80dBc/Hz @ 1GHz , 20kHz offset typical
RESOLUTION BANDWIDTH
RBW Range 3kHz, 30kHz, 300kHz, 4MHz
RBW Accuracy 15%
Video Bandwidth Range
10Hz ~ 1MHz in 1-3 steps
AMPLITUDE
Measurement Range
-103dBm to +20dBm, 1M~15MHz , Ref. Level > -30dBm
-120+1dBm to +20dBm, 15MHz ~ 600MHz, Ref. Level@-50dBm
-117+1dBm to +20dBm, 600MHz~2.3GHz, Ref. Level@-50dBm
-115+1dBm to +20dBm, 2.3GHz~3GHz
Overload Protection +30dBm, 25VDC
Reference Level Range
-110dBm ~ +20dBm
Accuracy +1dB @100MHz
Frequency Flatness
+1dB
Display Range Linearity +1dB over 70dB
DYNAMIC RANGE
Average Noise Floor -135dBm/Hz, 1MHz~15MHz , Ref. Level > -30dBm
-152+1dBm/Hz, 15MHz ~ 600MHz, Ref. Level@-50dBm
-149+1dBm/Hz, 600MHz~2.3GHz, Ref. Level@-50dBm
-147+1dBm/Hz, 2.3GHz~3GHz
Third Inter-Modulation
<-70dBc @-40dBm Input, Ref. Level@-30dBm
Harmonic Distortion <-60dBc RF Input < -40dBm, Ref. Level@-30dBm
Non-Harmonic Spurious <-110dBm @3kHz RBW

GENERAL

Display 640x480 high resolution color TFT LCD
Internal Memory 10 Traces, 10 Setup info, 10 Limit lines, 5Corrections, 10 Sequences
Markers 10 Markers for peaks; 5 normal-delta marker pairs;
Functions: Delta, Peak, Marker Track
Trace Detection 3 traces with Peak, Maximum hold, Freeze, Average and Trace math
Power Measurement ACPR, OCBW, Channel power, N dB BW, and Phase jitter
Autoset Function Auto tuning the measurement result for observation
Sequence Automated test by user-defined macros without any remote control

CONNECTORS

RF-Input Type: N female, 50Ω nominal ; RF input VSWR: <2 : 1 @ 0dBm Ref. Level
External Reference
Type: BNC female,
Clock Input 1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36, 15.4M, 19.2M
External Trigger Input
Type: BNC female, accept +5-V TTL signal
Reference Clock Output Type: BNC female, 10MHz
DC Input
jack: 5.5mm, 12V
RS-232C Sub-D 9 pins female
USB Connector
Front panel: type A receptable ; Rear panel: type mini-B receptable
DC Voltage Output Terminal Type: SMB male, output +9V/100mA max.

POWER SOURCE

AC 100 ~ 240V, 50/60Hz .

ACCESSORIES

Power cord x 1, User manual x 1 .

DIMENSION & WEIGHT

330(W)x170(H)x340(D) mm, Approx. 6kg .

OPTION LIST

Opt. 01   Tracking Generator

Frequency Range
Amplitude Range
Amplitude Accuracy
Amplitude Flatness
Harmonics
Reverse Power
Impedance
TG output VSWR

9kHz~3GHz
-50dBm~0dBm
+1dB@100MHz, 0dBm
+1dB@0dBm
<-30dBc typical
+30dBm
Type: N female, 50Ω nominal
<2 : 1

Opt. 02   Battery pack
10.8 Li-Ion battery pack x 2
Opt. 03   +1ppm Stability +1ppm , 0 ~ 50C, +1ppm/yr
Opt. 04   300Hz RBW RBW 300Hz, 3dB bandwidth
RBW accuracy : 15%
Opt. 05   9kHz & 120kHz RBW(*)
RBW selections : 9kHz and 120kHz, 6dB bandwidth
RBW accuracy : 15%
Opt. 06   10kHz & 100kHz RBW(*)
RBW selections : 10kHz and 100kHz, 3dB bandwidth
RBW accuracy : 15%
Opt. 07   AM/FM Demodulator&10kHz&100kHz RBW(*)
Demodulation : AM , FM
Output : internal speaker, 3.5mm stereo jack wired for mono operation
RBW selection : 10kHz and 100kHz, 3dB bandwidth
RBW accuracy : 15%
Opt. 08  GPIB Interface
IEEE 488 bus
OPTIONAL ACCESSORY
GSC-001 Soft Carrying Case Soft carrying case
GKT-001 General Kit set ADP-002: adaptor, SMA(j/F) ~ N(P/M) x 2
ATN-100: 10dB attenuator, N(j) ~ N(P) x 1
GTL-303: RF cable assembly(SMA(P),RD316,600mm)x2
GSC-002: Kit box x 1
GKT-002 CATV Kit set
ADP-001: adaptor, BNC(j/F) ~ N(P/M) x 2
ADP-101: adaptor, BNC(j/F)75Ω~BNC(P/M)50Ωx2
GTL-304: RF cable assembly(RG223,N(P)-N(j),300mm)x2
GSC-003: Kit box x 1
GKT-003 RLB Kit set GAK-001: termination 50Ω, N(P) x 1
GAK-002: Cap with chain, N(P) x 1
GTL-302: RF cable assembly(RG223,N(P),300mm)x2
GSC-004: Kit box x 1
GTL-401 DC Power Cord

DC power cord with DC jack and lighter plug, Current 5A

GAP-801 Pre-Amplifier GAP-801: Pre-amplifier with 10dB(typical) 9kHz ~ 6GHz

NOTE: 1. (*) Only one option can be selected among Opt. 05 to 07.
             2. Opt. 01 & 03 to 07 are factory-installed.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------- TOP
.......................................................................................................................................................................................................................................................................

Copyright (C) 2006 SC INTERNATIONAL RESEARCH CO., LTD. All Rights Reserved.
63/2772 Rajpattana Road, Sapansung, Sapansung, Bangkok 10240
Tel. (66)0-2948-7398 Fax (66)0-2948-7398

Back to menu  |  Contact us for order